Pima Hunter-Pro 32 - Page 15

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
15
To cancel arming:  system returns to normal operation
mode
3.1.2 Arming with Master Code
 Master Code
…
User Menu
Choose 1,2...

NOTE:
The system’s default Master Code is: 5555
3.1.3 Fast arming with User Code and/or Short Code
Pressing the code shall arm the system immediately:
 Short Code
 User Code
3.1.4 Arming the System to HOME state
Arming to “HOME 1”:   Short Code or User Code or Master
Code
Arming to “HOME 2”:   Short Code or User Code or Master
Code
NOTE:
After long pressing the HOME key (i.e. or ) and
entering the short/user/master code, the following message is
displayed: HOME 1 or HOME 2 according to the pressed key
3.1.5 Fast Arming
To quickly arm the system, if enabled by technician:
 Full Arming: 