26
Scanning Stations
Press MENU button, turn SCROLL knob to select “Scan”, and then press SCROLL knob to full
scan.
Manual Tune
This can help you when adjusting your antenna or when adding stations that were missed while
auto tuning.
1. Press MENU button, turn SCROLL knob to select “Manual tune”, and then press SCROLL
knob to confirm, the display will show the channel number and frequency.
2. Turn SCROLL knob to select the channel you wanted, and then press SCROLL knob to
confirm.
→
Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a
tuning meter with the signal strength and the multiplex name after a few seconds. The new stations will
be added to station list automatically.
3. To play the station, first press BACK button repeatedly to exit manual tune.
Prune Invalid
You may remove all unavailable stations from the station list.
1. Press MENU button, turn SCROLL knob to select “Prune invalid”, and then press SCROLL
knob to confirm.
2. Turn SCROLL knob to select “YES”, and then press SCROLL knob to confirm removing all
invalid stations.
DRC (Dynamic Range Control) value
If you are listening to music with high dynamic range in a noisy environment (for example
classical music while cooking), you may wish to compress the audio dynamic range. This makes
quiet sounds louder and loud sounds quieter.
1. Press MENU button, turn SCROLL knob to select “DRC”, and then press SCROLL knob to
confirm.
2. Turn SCROLL knob to select “DRC high”, “DRC low” or “DRC off”, and then press SCROLL
knob to confirm.
To Next Page
Loading...
