40
Multi-room
Multi-room is a feature that enables you control your radio (one or more) via UNDOK App for
playback.
You can enjoy music by using your smartphone or tablet which has UNDOK App to respectively
control the radios (multi-room capable devices) in the kitchen, bedroom or living room. Of course
you also can group control the radios for playing.
1. To use multi-room feature, download UNDOK app from App Store for your iOS
smartphone or download from Google Play for your Android smartphone.
2. Start UNDOK app, making sure your receiver and smartphone are connected to same WiFi
network.
3. All available devices will be listed.
4. Create group, taping the edit icon which is following device name in device list, and
then “Group Setup” screen will be shown. (Please refer to Fig. 1 and 2.)
a. Tap the grey circle before device name which is under “Sharing with” option on “Group
setup” screen and make it turn green to add the device to group. (Please refer to Fig. 2.)
b. Tap “Rename” under “Group name” option on “Group Setup” screen to enter a group
name or select one usual name from the list, and then select “Done” to create group.
(Please refer to Fig. 2 and 3.)
Note: to dissolve the group, tap “Delete group” to delete the group. (Please refer to
Fig. 9.)
c. Device list will appears again and the group will be shown with group name and the
devices in the group. Tap on group name to select the group. (Please refer to Fig. 4.)
d. All clients in the group will synchronously play the program which the server is playing.
You can drag the volume control bar to change the master volume for all grouped
devices. You also can tap on the volume control and then change volume for each device
respectively. (Please refer to Fig. 5 and 6.)
e. Go to “SOURCE” tab can select another multi-room capable mode from “Multi-room
Sources” list to group playing. The modes Aux in and Bluetooth under “Standalone
Sources” are not compatible with Multi-room that the master device will be removed from
the group to play stand-alone once you selected either mode from “Standalone Sources”
list. (Please refer to Fig. 7 and 8.)
Note: master device is the Server in the group which you can check from Main
menu - System settings - Multi-room - View details.
To Next Page
Loading...
