36
Setting Equaliser
This feature enables you to choose a sound equalization profile. Each of the equalization setting
will change the tone of the sound from your radio when selected.
1. Press MENU button - Main menu - System settings - Equaliser, and then press SCROLL
knob to confirm.
2. Turn SCROLL knob and then press it to select a profile. The equalization profile options:
Normal/Flat/Jazz/Rock/Movie/Classic/Pop/News/My EQ.
3. To set up My EQ, select “My EQ”, and then press SCROLL knob to confirm. Turn SCROLL
knob to select “Bass” or “Treble”, and then press SCROLL knob to confirm. Turn SCROLL
knob to change the value of Bass or Treble, and then press SCROLL knob to confirm. Or
select “Loudness” and then press SCROLL knob to set “On” or “Off”. Press BACK button,
display will show “Save changes”. Turn and press SCROLL knob to select “YES” to save
changes.
Network Setup
Users encountering networking issue may find these options useful for diagnosing and fixing
network problems.
1. Press MENU button - Main menu - System settings - Network, press SCROLL knob to
confirm.
2. Turn SCROLL knob to select your preferred network setting option:
Network wizard: Scan for available networks
PBC Wlan setup:
Set up a WPS encrypted network (only support the
router uses WPS 2.0)
View settings.:
View network settings such as MAC address, Wlan
region, IP address etc.
Manual settings: Set wireless connection
NetRemote PIN setup
Set a PIN code for setup connection between your radio
and smartphone via UNDOK app. The default PIN code
is 1234.
Network profile:
List of registered networks or press SCROLL knob
delete some unwanted networks
Keep network connected:
Keep network connected in DAB, FM, Aux in, Bluetooth
and standby modes
3. Press SCROLL knob to confirm your setting.
To Next Page
Loading...
