38
unit.
1. Press MENU button - Main menu - System settings - Software update, press SCROLL
knob to confirm.
2. Turn SCROLL knob to select “Auto-check setting”, your radio will check periodically for new
version software.
3. Turn SCROLL knob to select “Check now”, your radio will now to check new version software
and automatically upgrade the detected new version software.
Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings for
date/time and network. Once this has finished, the system is ready to use in most modes.
Redo setup wizard will not erase user settings such as searched stations and presets.
1. Press MENU button - Main menu - System settings - Setup wizard, press SCROLL knob
to confirm.
2. Turn SCROLL knob to select “YES”, and then press SCROLL knob to confirm. Please refer
to page 10 for following settings.
Viewing System Info
This information may be requested when dealing with technical support issues.
1. Press MENU button - Main menu - System settings - Info, press SCROLL knob to confirm.
2. Turn SCROLL knob to view “SW version”, “Spotify version”, “Radio ID” and “Friendly Name”.
Setting Backlight
This radio display has a backlight with adjustable brightness level.
1. Press MENU button - Main menu - System settings - Backlight, press SCROLL knob to
confirm.
2. Turn SCROLL knob to select “Power-on mode” or “Standby Mode”, then press SCROLL
knob to confirm.
3. Turn SCROLL knob to select backlight level, and then press SCROLL knob to confirm the
setting.
To Next Page
Loading...
