31
Aux in Mode
AUX IN allows for quick and easy connection to an MP3 player or other external audio sources.
1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect
to your external audio device through the AUX IN socket at the rear of unit.
2. Connect power adapter to mains socket, press STANDBY button to switch unit on.
3. Press MODE button repeatedly to select Auxiliary Input mode.
4. In Aux in mode, you may operate your audio device directly for playback features.
5. To gain optimal volume levels, adjusting the output volume level on the audio device as well
is recommended.
ļ Note: the unit will automatically switch to standby mode after 15 minutes if the source device
is disconnected, switched off or the volume is too close to mute.
To Next Page
Loading...
