32
Bluetooth Mode
Pair the unit with a Bluetooth device to listen to music:
1. Press the MODE button to select Bluetooth mode.
2. The display will flash in repeatedly.
3. Activate your Bluetooth device and look for your radio’s model number “Pinell Supersound
III” in the Bluetooth list.
4. Select “Pinell Supersound 301” and enter “0000” for the password if necessary.
5. The icon will remains steadily on the display when connection is successful.
6. To disconnect the Bluetooth connection, press MENU button, turn SCROLL knob to select
“BT disconnect”, and then press SCROLL knob to confirm. The display will show “Device
disconnect?”, turn SCROLL knob to select “YES”, and then press SCROLL knob to confirm.
Note: the unit will automatically switch to standby mode after 15 minutes if the source device
is disconnected, switched off or the volume is too close to mute.
To Next Page
Loading...
