13
FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise,
the last listened FM station will be selected.
3. To manually scan, while FM frequency shows up, push / to change frequency by
0.05MHz per step.
4. To automatically scan, while FM frequency shows up, press & hold / and your
radio will automatically search until it reached the next available station.
Scan settings
This enables you set FM scans stop at stations with strong signal or stop at any available station.
1. Press MENU button, press / to select “Scan setting”, and then press SELECT to
confirm.
2. Display will show “Strong stations only?”, press / to select “YES”, and then press
SELECT to confirm. The scans stop only at stations with good signal strength.
3. Press / to select “NO”, and then press SELECT to confirm. The scans stop at any
available station. This may result in a poor quality audio from weak stations.
Viewing Station Information (via Remote Control)
There is a variety of station information transmitted by broadcaster. To view currently playing
station information, press INFO button on the remote control repeatedly and the display will show
information referring to Radio text, Program Type, Program Name and Date.
Storing Preset Stations
Your radio can store up to 20 of your favourite FM stations. This will enable you to access your
favourite stations quickly and easily.
1. While playing your favourite station, press & hold PRESET until display shows “Save to
Preset”.
2. Press / to select the position. Press SELECT and display will show “Preset stored”.
3. Preset number “ #” (# = 1-20) will show on the display.
@ Note: For preset positions 11-20 via the remote control, first press 10+ and then hold down one of the
PRESET buttons 1-10 until "Preset stored" appears on the display.
To Next Page
Loading...
