23
CD Player
Improper operation can lead to damage! Do not insert recording media other than standard CD
format (e.g. mini-discs) into the CD player. These may not play correctly and be ejected. Insert
only one CD at a time into the CD player.
Insert a CD (print side up) until it retracts inward. The CD player automatically loads the CD and
starts playback. The display will show "Loading". Playback will start automatically once the table
of contents has been read. The display shows "No Disc" when the unit is in CD mode and no CD
is inserted.
The display shows the following information in CD mode: CD mode, Time and date, Elapsed
playback time in minutes and seconds, Title number, Playback status (Play / Pause)
l To pause / resume CD playback, press the button.
l To move to the next track, press the button once.
l Press & hold the button for fast forward through a track.
l To go to the previous track, press & hold the button.
l To stop CD playback, press .
Adjust the CD playback (via Remote Control)
You can select different playback sequences for playing tracks using the remote control:
PRG (Program) ā Selection of tracks
1. Press PRG button
2. Press / to select track and press OK. Repeat (e.g., 01, 05, 08). Press PRG to
confirm. Press .
SHUF (Shuffle) - Random sequence
REP (Repeat) - Repeat
l Press 1x - repeat title
l Press twice - repeat CD
To Next Page
Loading...
