Pinell SUPERSOUND 701 - General Radio Functions; Sleep Timer and Alarm Settings

29
General Operation
Setting Sleep (via Remote Control)
This feature enables your radio to switch to standby mode by itself after a set sleep time.
1. Press MENU button - Main menu - Sleep, and then press SELECT to confirm.
2. Press / to select a sleep time, and then press SELECT to confirm. The sleep icon
and sleep time will show on the display.
The sleep time options: Sleep OFF/15/30/45/60 Minutes
3. To turn the sleep function off while the sleep timer is still counting down, select “Sleep”,
press / to select “Sleep OFF”.
Setting Alarm
Your radio includes dual alarms. Set Alarm, making sure set time at first.
1. Press MENU button - Main menu - Alarms, and then press SELECT to confirm.
2. Press / to select “Alarm 1” or “Alarm 2”, and then press SELECT to confirm.
3. Press / to select options, and then press SELECT to confirm the setting.
Enable
Alarm active day: Off, Daily, Once, Weekends or Weekdays
Time
Alarm time: 00:00 (manually set up the time)
Mode
Alarm mode: Buzz, Internet radio, DAB or FM
(If the wake-up mode is DAB and the DAB+ signal strength is low, the
buzzer alarm will be triggered.)
Preset
Last listened / Saved preset station
(not available for Buzz mode).
Volume
Alarm volume
Save
Save the alarm
4. When the display shows “Alarm Saved”, the alarm setting is successful. or will show
on the display.
5. To temporarily switch off alarm, press SNOOZE button repeatedly to set snooze time for
5, 10, 15 or 30 minutes in turn. The unit will go to standby and snooze time will show on the
display.
6. To turn off alarm, press the ALARM button 1 or 2 when the alarm sounds.
7. To cancel Alarm, refer to steps1-3 to enable alarm “Off”. or will disappear from
display