Pinell SUPERSOUND 701 - Radio System Settings; Equalizer and Network Setup

30
Setting Equaliser
This feature enables you to choose a sound equalization profile. Each of the equalization setting
will change the tone of the sound from your radio when selected.
1. Press MENU button - System settings - Equaliser, and then press SELECT to confirm.
2. Press / - select profile - press SELECT.
Equalization profile options: Normal/Flat/Jazz/Rock/Movie/Classic/Pop/News/My EQ.
3. To set up My EQ, select “My EQ”, and then press SELECT to confirm. Press /
and select “Bass” or “Treble”, and then press SELECT to confirm. Press / to
change the value of Bass or Treble, and then press SELECT to confirm. Or select
“Loudness” and then press SELECT to set “On” or “Off”. Press BACK button, display will
show “Save changes”. Press / and to select “YES” and press SELECT to save
changes.
Network Setup
Users encountering networking issue may find these options useful for diagnosing and fixing
network problems.
1. Press MENU button - System settings - Network, press SELECT to confirm.
2. Press / to select your preferred network setting option:
Network wizard
Scan for available networks
PBC Wlan setup
Set up a WPS encrypted network (only support the
router uses WPS 2.0)
View settings
View network settings such as MAC address, Wlan
region, IP address etc.
Wlan region
Select your region
Manual settings
Set wireless connection
NetRemote PIN setup
Set a PIN code for setup connection between your radio
and smartphone via UNDOK app. The default PIN code
is 1234
Network profile
List of registered networks
Clear network settings
Select “YES” or “NO”
Keep network connected
Keep network connected in DAB, FM, AUX, Bluetooth
and standby modes
3. Press SELECT to confirm your setting.