Pinell SUPERSOUND 701 - Software and System Information; Software Updates; Viewing System Details

32
Software Update – Over the network
From time to time, your radio may make software upgrades available with bug fixes and/or
additional features.
If your radio detects that newer software is available, it will ask if you want to go ahead with an
update. If you agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
C A U T I O N
Before starting a software upgrade, ensure that your radio is plugged into a stable mains
power connection. Remove power during a software update may permanently damage the
unit.
1. Press MENU button - System settings - Software update, press SELECT to confirm.
2. Press / to select “Auto-check setting”, press SELECT and your radio will check
periodically for new version software.
3. Press / to select “Check now”, press SELECT and your radio will now to check
new version software and automatically upgrade the detected new version software.
Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings for
date/time and network. Once this has finished, the system is ready to use in most modes.
Redo setup wizard will not erase user settings such as searched stations and presets.
1. Press MENU button - System settings - Setup wizard, press SELECT to confirm.
2. Press / to select “YES”, and then press SELECT to confirm. Please refer to page
8 for more information.
Viewing System Info
This information may be requested when dealing with technical support issues.
1. Press MENU button - System settings - Info, press SELECT to confirm.
2. Press / to view “SW version”, “Spotify version”, “Radio ID” and “Friendly Name”.