151
Menu Mode
18) Timer Setting
The present day of the week, time, and daylight savings time are set.
1 Select ‘OPTION’.
2 Select ‘TIMER SETTING’.
3 Set each item by pressing the 5/∞/2/3 buttons to move
the cursor to ‘PRESENT TIME’.
DAYLIGHT SAVING TIME ..... sets daylight savings time
ON: Displays time as present time + 1 hour
OFF: Disables [DAYLIGHT SAVING TIME] mode
Week ..................................... Set current day of the week
Hour, Minute ......................... Sets to current time.
Note
The set time may slow by approximately 1 minute per
month from the actual time.
The ‘TIMER SETTING’ is set for all inputs.
19) Program Timer Setting
The panel can be pre-programmed for a selected time.
Factory setting: OFF
1 Select ‘OPTION’.
2 Select ‘TIMER SETTING’.
3 Change the setting by pressing the 2/3 buttons to move
the cursor to the ‘PROGRAM TIMER’.
Each time a 2/3 button is pressed, the setting changes
as shown below.
PROGRAM TIMER Setting Example
•Every day, power turns on at 10:00
Input and function settings are the same as those set
the last time the unit was turned OFF.
•At 20:00 (8 o’clock PM), the screen turns white
At 21:00 (9 o’clock PM), power turns OFF
–
SET
EXIT
MENU
MONDAY
12:00:00
SAVING TIME
DAYLIGHT
SET
RETURN
PRESENT TIME
: OFF
Screen 3
Screen 3
–
SET
EXIT
MENU
TIMER SETTING
PROGRAM TIMER
RETURN
PRESENT TIME
: OFF
3 ON
OFF 2
2
3
To Next Page
Loading...
Need help?
General