63
Table Top Stand: PDK-TS01
After assembling, connect the stand to the floor to prevent it from falling over.
1. Attach the stabilization bolts that come with the stand
to the Plasma Display.
2. Stabilize the display by attaching it to a wall or a
standing beam with a strong cord.
(Repeat the same steps laterally to stabilize the
assembly to the left and right.)
Use cord and hooks that are available on the market
(sold separately).
7 How to use the stabilization bolts
7 Stabilizing to the floor
÷ Use screws (sold separately) to attach and stabilize
the stand.
1
2
To Next Page
Loading...
Need help?
General