91
Speaker System: PDP-S44-LR
2) Connect the cords
(Turn off the power of all connected units before
connecting the cords.)
Connect the display’s SPEAKER R and L terminals with
the speakers terminals using the included connection
cords.
Cord Clamper
Peel off the protective tape from the back of
the clamper then mount the clamper in the
desired position. Clamp the cords together.
The conductor on each cord has a polarity ª·.
Connect each conductor to the correct terminal.
While holding the button of each speaker terminal,
insert a cord conductor.
3) Care and Maintenance
When the cabinet gets dirty...
• Wipe with a lit-free, soft, dry cloth.
If the cabinet is heavily soiled, soak a cloth in a neutral
detergent solution, wring well, and wipe the cabinet.
Remove any remaining moisture by wiping with a dry
colth.
If you want to use a chemical cloth for cleaning, read
any caution information provided with the chemical cloth
product.
• Do not use solvent such as thinner or benzine for
cleaning. These chemical can damage the surface finish,
deteriorating or stripping the coating.
• To remove dust from the speaker nets, use a vacuum
cleaner’s. Avoid applying the vacuum cleaner hose
directly to the speakers without using a brush adapter
or using a nozzle adapter.
• To prevent damage to the cabinet and speaker nets, do
not scrach or hit them with hard objects. Also, do not
stab the speaker nets with sharp objects.
Do not apply volatile chemicals such as insecticide on
the cabinet. Avoid leaving a rubber or vinyl products in
contact with the cabinet for prolonged periods. The
surface finish can deteriorate or the coating may be
stripped off.
To Next Page
Loading...
Need help?
General