Pioneer PDP-435HDG

06Preparation
English
17
En
POWER
ON STANDBY
POWER
ON STANDBY
Installing the Media Receiver
POWER
ON STANDBY
Plasma Display
Media Receiver
(vertical installation)
(horizontal installation)
System cable
(approx. 3 meters)
• Do not place a VCR or any other device on top of
the Media Receiver.
• When installing, allow enough space on the
sides and above the Media Receiver.
• Do not block the cooling vent on any side of the
Media Receiver or the rear ventilation fan open-
ing of the Media Receiver.
Over 10 cm
Over 5 cm
Over 5 cm
Over 5 cm
POWER
ON STANDBY
Over 5 cmOver 5 cm
Over 5 cm
Over 10 cm