Piper PA-32RT-300T User Manual

LANCE II SERVICE MANUAL
COMPONENT
LUBRICANT FREQUENCY
1. NOSE GEAR STRUT HOUSING GREASE FITTING MIL-G-23827 100 HRS
2.
NOSE GEAR
PIVOT
POINT AND
HYDRAULIC
CYLINDER ROD END MIL-L-7870 100 HRS
3. NOSE GEAR DOOR RETRACTION
MECHANISM
MIL-L-7870 100 HRS
4. NOSE GEAR DOOR HINGES MIL-L-7870 100 HRS
5. EXPOSED OLEO STRUT FLUOROCARBON RELEASE
AGENT DRY LUBRICANT
MS-122
100
HRS
6. NOSE WHEEL BEARINGS TEXACO MARFAX ALL
PURPOSE GREASE OR
MOBIL MOBIL GREASE
77 (OR MOBIL EP2
GREASE) 100 HRS
7. NOSE GEAR DRAG LINK ASSEMBLIES MIL-L-7870 100 HRS
8. NOSE GEAR TORQUE LINK ASSEMBLY AND
STRUT HOUSING MIL-G-23827 100 HRS
9. DOWNLOCK HOOK, TENSION SPRING ARMS,
SHIMMY DAMPENER
AND ALIGNING
ROLLER
PIVOT POINTS MIL-L-7870 100 HRS
10. STEERING BELLCRANK PIVOT POINTS AND
ROD ENDS MIL-L-7870 100 HRS
11. NOSE GEAR
OLEO STRUT FILLER
POINT
MIL-H-5606
AS REQUIRED
10
3
8
SPECIAL INSTRUCTIONS
1. Nose
wheel bearings
- Disassemble
and clean
with a dry
type solvent.
Ascertain that greae
is packed between
the
roller and cone. Do
not pack grease In
wheel
housing. Wheel
bearings require cleaning
and repacking
after exposure
to an abnormal
quantity of water.
2. Oleo struts Fill per Instructions on unit or refer to
service manual.
Figure 2-11. Lubrication Chart (Landing Gear, Nose)
Issued: 1/3/78 HANDLING AND SERVICING
1C19

Piper PA-32RT-300T Specifications

General

Brand	Piper
Model	PA-32RT-300T
Category	Aircrafts
Language	English