Pixsys ATR144 - GROUP B - cnd.1 - Outputs and regulation Process 1

User manual - ATR144- 49
12 c . F r.1 Conversion Frequency AI1
Sampling frequency of digital / analogue converter for
AI1. Increasing the conversion speed will slow down
reading stability (example: for fast transients, as the
pressure, it is advisable to increase sampling frequency)
4.17. H z 4.17 Hz (Min. conversion speed)
6.25Hz 6.25 Hz
8.33 Hz 8.33 Hz
10.0Hz 10.0 Hz
12.5 Hz 12.5 Hz
1 6 .7 H z 16.7 Hz (Default) Ideal for
filtering noises 50 / 60 Hz
19.6 Hz 19.6 Hz
33.2Hz 33.2 Hz
39.0 Hz 39.0 Hz
50.0 Hz 50.0 Hz
6 2. 0 Hz 62.0 Hz
123 Hz 123 Hz
242Hz 242 Hz
470 Hz 470 Hz (Max. speed conversion)
13÷17 Reserved Parameters - Group A
Reserved parameters - Group A
12.b GROUP B -
c m d .1
- Outputs and regulation
Process 1
18 c . o u .1 Command Output 1
Selects the command output related to the process1
and the outputs related to the alarms.
c. o 2 Command on relay output Q2.
c. o1 Command on relay output Q1. (Default)
c. S S r Command on digital output.
c. v A L. Servo-valve command with open loop.