Pixsys ATR144 - Page 50

50 - ATR144 - User manual
ATR144-ABC Command AL. 1 AL. 2
c. o 2
Q2 Q1 DO1
c. o1
Q1 Q2 DO1
c. S S r
DO1 Q1 Q2
c. v A L.
Q1(open) Q2(close) DO1 -
ATR144-ABC-T Command AL. 1
c. o1
Q1 DO1
c. S S r
DO1 Q1
c. v A L.
Q1(open) DO1(close) -
19
A c . t .1 Action type 1
Action type to control process 1.
HEAt Heating (N.A.) (Default)
cooL Cooling (N.C.)
20 c . H Y .1 Command Hysteresis 1
Sets the hysteresis value used for process control during
ON/OFF functioning
-9999..+9999 [digit
1 p. 86
] (degrees.tenths for
temperature sensors). Default 0.2.
21 L.L.S.1 Lower Limit Setpoint 1
Lower limit setpoint selectable for command setpoint 1.
-9999..+30000 [digit
1 p. 86
] (degrees.tenths for
temperature sensors). Default 0.
22 U . L . S .1 Upper Limit Setpoint 1
Lower limit setpoint selectable for command setpoint 1.
-9999..+30000 [digit
1 p. 86
] (degrees for temperature
sensors). Default 1750.