Pixsys ATR144 - Page 71

User manual - ATR144- 71
126 u.M.P. c. User Menu Pre-Programmed Cycle
Allows modification to the rising/falling gradient
and retention time from the user menu (during the
pre-programmed cycle functioning). To modify the
parameters, press SET.
dis a b. Disabled (Default)
ris. G r. Only rising gradient
m a.ti. Only retention time
ri. G. m.t. Rising gradient and retention time
faL.Gr Only falling gradient
ri.Fa.G. Rising and falling gradient
fa.G.m.t. Falling gradient and retention time
r. f. G . m . t . Rising gradient, retention time
and falling gradient
127 S cL. t. Scrolling Time
Selects the timeout for the user menu data visualization,
before returning to the default page
3 s 3 seconds
s s 5 seconds (Default)
10 s 10 seconds
30 s 30 seconds
1 MiN 1 minutes
5 MiN 5 minutes
10 MiN 10 minutes
M A n.S c. Manual scroll
128 d . SP. F. Display Special Functions
diS A b. Special functions disabled
SWAP Shows the setpoint on display 1
and the process on display 2 (only
if Par. 123 vi.d.2 set on c.1.SPv)