Pixsys ATR144 - GROUP K - SL.S.P. - Serial communication Slave

User manual - ATR144- 73
143 L.b . b . Loop Break Band
Sets the minimum delta process variation required to
occur (within the timeframe set in P_142 Lb . t.) in order
to avoid a loop break error
1..+10000 [digit
1 p. 86
] (degrees.tenths for temperature
sensors). Default 10.0°C.
144÷148 Reserved Parameters - Group J
Reserved parameters - Group J.
12.k GROUP K -
s L.S .P.
- Serial communication
Slave
(disponibile solo su ATR-ABC-T)
149 M b .SL. Modbus Slave
diS A b. Disabled
En Ab. Enabled. (Default)
150 sL. a d . Slave Address
Select slave mode on ATR144, for serial communication.
1..254. Default: 247.
151 SL.b.r. Slave Baud Rate
Selects baudrate for serial communication
1. 2 k 1200 bit/s
2.4 k 2400 bit/s
4.8 k 4800 bit/s
9.6 k 9600 bit/s
19.2 k 19200 bit/s (Default)
28.8 k 28800 bit/s
3 8 .4 k 38400 bit/s
57.6 k 57600 bit/s
115. 2 k 115200 b it /s