Pixsys DRR245 - Serial Communication Settings

User manual - DRR245 47
71
sL. a d .
Slave Address
Select slave address for serial communication.
1 - 254.
Default: 254
72
se. d e.
Serial Delay
Select serial delay.
0 – 100 milliseconds.
Default: 20
73
L.L. o . p.
Lower Limit Output Percentage
Selects min. value for command output percentage
0 – 100%, Default: 0%.
Ex: with
c.out
selected as 0..10 V and
L.L. o .P.
set at 10%, command output
can change from a min. of 1 V to a max. of 10 V.