Firmware Update and Boot Loader Upgrade
62 EP Series Ultra HD LCD Displays User Guide
3 Make sure the IP address in your browser is correct and then click OK.
4 When the process is complete, you should see the login page again.
Firmware Up date and Bo ot Loader Upgrade
In most cases, you will not need to update firmware for the network interface. If you
do, contact Planar’s Technical Support Department. See "Accessing Planar’s Technical
Support Website" on page 78 for more information.
WARNING! Do not use the controls in these two sections unless you have received a specific
procedure and firmware from Planar. Following improper procedures can disable the net-
work interface and require factory repair service.
To Next Page
Loading...
