User’s Manual of IGS-5225 series
114
RMON: Enable/disable RMON trap.
4.2.2.5 SNMP Trap Source Configuration
This page provides SNMP trap source configurations. A trap is sent for the given trap source if at least one filter with filter type
included matches the filter, and no filters with filter type excluded matches.
Figure 4-2-2-5: SNMP Trap Source Configuration Page Screenshot
Click “Add New Entry” to add a new entry. The maximum entry count is 32.
Figure 4-2-2-6: SNMP Trap Source Configuration Page Screenshot
The page includes the following fields:
Object Description
• Name
Indicates the name for the entry.
• Type
The filter type for the entry. Possible types are:
■ included: An optional flag to indicate a trap is sent for the given trap source
To Next Page
Loading...
