Planet IGS-5225 Series - 2.3.1 Installing the SFP Transceiver

User’s Manual of IGS-5225 series
63
2.3.1 Installing the SFP Transceiver
The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power
down the Industrial Managed Switch as Figure 2-19 appears.
Figure 2-19: Plugging in the SFP/SFP+ Transceiver
 Approved PLANET SFP/SFP+ Transceivers
PLANET Industrial Managed Switch supports both single mode and multi-mode SFP transceivers. The following list of
approved PLANET SFP/SFP+ transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100BASE-X SFP)
Model DDM Speed (Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (nm)
Operating
Temp.
MFB-FX -- 100 LC Multi Mode 2km 1310nm
0 ~ 60 ℃
MFB-F20 -- 100 LC Single Mode 20km 1310nm
0 ~ 60 ℃
MFB-F40 -- 100 LC Single Mode 40km 1310nm
0 ~ 60 ℃
MFB-F60 -- 100 LC Single Mode 60km 1310nm
0 ~ 60 ℃
MFB-F120 -- 100 LC Single Mode 120km 1550nm
0 ~ 60 ℃
MFB-TFX -- 100 LC Multi Mode 2km 1310nm
-40 ~ 75 ℃
MFB-TF20 -- 100 LC Single Mode 20km 1310nm
-40 ~ 75 ℃