User’s Manual of IGS-5225 series
404
4.7.1.1 MEP Configuration
The Maintenance Entity Point instances are configured here; screen in Figure 4-7-1-1 appears.
Figure 4-7-1-1: MEP configuration page screenshot
The page includes the following fields:
Object Description
• Delete
This box is used to mark a MEP for deletion in next Save operation.
• Instance
The ID of the MEP. Click on the ID of a MEP to enter the configuration page.
• Domain
Port: This is a MEP in the Port Domain. 'Flow Instance' is a Port.
Esp: Future use
Evc: This is a MEP in the EVC Domain. 'Flow Instance' is a EVC
Mpls: Future use
• Mode
MEP: This is a Maintenance Entity End Point.
MIP: This is a Maintenance Entity Intermediate Point.
To Next Page
Loading...
