Planet IGS-5225 Series - Page 327

User’s Manual of IGS-5225 series
327
• radius: Use remote RADIUS server(s) for authentication.
• tacacs: Use remote TACACS+ server(s) for authentication..
Command Authorization Method Configuration
The command authorization section allows you to limit the CLI commands available to a user.
The table has one row for each client type and a number of columns, which are:
Object Description
• Client
The management client for which the configuration below applies.
• Methods
Method can be set to one of the following values:
• no: Command authorization is disabled. User is granted access to CLI
commands according to his privilege level.
• tacacs: Use remote TACACS+ server(s) for command authorization. If
all remote servers are offline, the user is granted access to CLI
commands according to his privilege leve
• Cmd Lvl
Authorize all commands with a privilege level higher than or equal to this level.
Valid values are in the range 0 to 15.
• Cfg Cmd
Also authorize configuration commands
Accounting Method Configuration
The accounting section allows you to configure command and exec (login) accounting.
The table has one row for each client type and a number of columns, which are:
Object Description
• Client
The management client for which the configuration below applies.
• Methods
Method can be set to one of the following values:
• no: Accounting is disabled.
• tacacs: Use remote TACACS+ server(s) for accounting.
• Cmd Lvl
Enable accounting of all commands with a privilege level higher than or equal to
this level.