Planet SGS-6341 Series - Debug Vrrp

60-11
60.3 debug vrrp
Commands:
debug vrrp [ all | event | packet [recv | send]]
no debug vrrp [ all | event | packet [recv | send]]
Function:
Displays information for VRRP standby cluster status and packet transmission; the “no debug vrrp”
command disables the debug information.
Default:
Debugging information is disabled by default.
Command mode:
Admin Mode
Example:
Switch#debug vrrp
2001/01/01 00:50:28 : IMI: VRRP SEND[Hello]: Advertisement sent for vrid=[1],
virtual-ip=[10.1.1.1]
2001/0
1/01 00:50:30 : IMI: VRRP SEND[Hello]: Advertisement sent for vrid=[1],
virtual-ip=[10.1.1.1]
2001/01/01 00:50:31 : IMI: VRRP SEND[Hello]: Advertisement sent for vrid=[1],
virtual-ip=[10.1.1.1]
2001/01/01 00:50:32 : IMI: VRRP SEND[Hello]: Advertisement sen
t for vrid=[1],
virtual-ip=[10.1.1.1]
2001/01/01 00:50:33 : IMI: VRRP SEND[Hello]: Advertisement sent for vrid=[1],
virtual-ip=[10.1.1.1]
60.4 disable
Commands:
disable
Function:
Deactivates VRRP
Default:
Not configured by default.
Command mode:
VRRP protocol configuration mode
Usage Guide: