Planet SGS-6341 Series - Login; Password

SGS-6341 Series Command Guide
1-59
Parameter:
chinese for Chinese display;
english for English display.
Command mode:
Admin and Config Mode.
Default:
The default setting is English display.
Usage Guide:
Switch provides help information in two languages, the user can select the language according to their preference.
After the system restart, the help information display will revert to English.
1.1.20 login
Command:
login
no login
Function:
login enable password authentication, no login command cancels the login configuration.
Command mode:
Global mode
Default:
No login by default
Usage guide:
By using this command, users have to enter the password set by password command to enter normal user mode
with console; no login cancels this restriction.
Example:
Enable password
Switch(config)#login
1.1.21 password
Command:
password [0|7] <password>
no password
Function:
Configure the password used for enter normal user mode on the console. The “no password” command deletes this
password.