Planet SGS-6341 Series - Lacp System-Priority; Lacp Timeout

9-15
Usage Guide:
Use this command to modify the port priority of LACP protocol, the no command restores the default
value.
Example:
Set the port priority of LACP protocol.
Switch(Config-If-Ethernet1/0/1)# lacp port-priority 30000
9.4 lacp system-priority
Command:
lacp system-priority <system-priority>
no lacp system-priority
Function:
Set the system priority of LACP protocol.
Parameters:
<system-priority>: The system priority of LACP protocol, ranging from 0 to 65535.
Command mode:
Global Mode
Default:
The default priority is 32768.
Usage Guide:
Use this command to modify the system priority of LACP protocol, the no command restores the
default value.
Example:
Set the system priority of LACP protocol.
Switch(config)# lacp system-priority 30000
9.5 lacp timeout
Command:
lacp timeout {short | long}
no lacp timeout
Function:
Set the timeout mode of LACP protocol.
Parameters:
The timeout mode includes long and short.