Planet SGS-6341 Series - Show Telnet Login; Who

SGS-6341 Series Command Guide
1-78
Example:
Switch#show ssh-server
ssh server is enabled
ssh-server timeout 180s
ssh-server authentication-retries 3
ssh-server max-connection number 6
ssh-server login user number 2
1.2.18 show telnet login
Command:
show telnet login
Function:
Display the information of the Telnet client which currently establishes a Telnet connection with the switch.
Command mode:
Admin and Configuration Mode.
Usage Guide:
Check the Telnet client messages connected through Telnet with the switch.
Example:
Switch #show telnet login
Authenticate login by local
Login user:
aa
1.2.19 who
Command:
who
Command mode:
All configuration modes
Example:
Show the current login users with vty.
Switch #who
Telnet user a login from 192.168.1.20