Planet SGS-6341 Series - Snmp-Server Enable

SGS-6341 Series Command Guide
1-89
Parameter:
<string> is the community string set;
ro | rw is the specified access mode to MIB, ro for read-only and rw for read-write.
<num-std> is the access-class number for standard numeric ACL, ranging between 1-99;
<name> is the access-class name for standard ACL, the character string length is ranging between 1-32;
<ipv6-num-std> is the access-class number for standard numeric IPv6 ACL, ranging between 500-599;
<name> is the access-class name for standard IPv6 ACL, the character string length is ranging between 1-32.
<read-view-name> is the name of readable view which includes 1-32 characters.
<write-view-name> is the name of writable view which includes 1-32 characters.
Command mode:
Global Mode
Usage Guide:
The switch supports up to 4 community strings. It can realize the access-control for specifically community view by
binding the community name to specifically readable view or writable view.
Example:
Add a community string named “private” with read-write permission.
Switch(config)#snmp-server community rw private
Add a community string named “public” with read-only permission.
Switch(config)#snmp-server community ro public
Modify the read-write community string named “private” to read-only.
Switch(config)#snmp-server community ro private
Delete community string “private”.
Switch(config)#no snmp-server community private
Bind the read-only community string “public” to readable view “pviewr”.
Switch(config)#snmp-server community ro public read pviewr
Bind the read-write community string “private” to readable view “pviewr” and writable view “pvieww”.
Switch(config)#snmp-server community rw private read pviewr write pvieww
1.4.13 snmp-server enable
Command:
snmp-server enable
no snmp-server enable
Function:
Enable the SNMP proxy server function on the switch. The “no snmp-server enable” command disables the SNMP
proxy server function