Planet SGS-6341 Series - Show Ipv6 Neighbors

19-195
fe80::250:baff:fef2:a4
f4, Vlan1
1024
network segment is 2002::/64, via means passing
fe80::250:baff:fef2:a4f4 is the next hop, VLAN1 is the exit
interface name, 1024 is router weight.
19.2.34 show ipv6 neighbors
Command:
show ipv6 neighbors [{vlan|ethernet|tunnel} interface-number | interface-name | address
<ipv6address>]
Function:
Display neighbor table entry information.
Parameter:
Parameter {vlan|ethernet|tunnel} interface-number|interface-name specify the lookup based on
interface. Parameter ipv6-address specifies the lookup based on IPv6 address. It displays the
whole neighbor table entry if without parameter.
Command Mode:
Admin and Configuration Mode
Example:
Switch#show ipv6 neighbors
IPv6 neighbour unicast items: 14, valid: 11, matched: 11, incomplete: 0, delayed: 0,
manage items 5
IPv6 Address Hardware Addr Interface Port
State
2002:ca60:c801:1:250:baff:fef2:a4f4 00-50-ba-f2-a4-f4 Vlan1 Ethernet1/0/2
reachable
3ffe:3240:800d:1::100 00-30-4f-01-27-86 Vlan1 Ethernet1/0
/3
reachable
3ffe:3240:800d:1::8888 00-02-01-00-00-00 Vlan1 Ethernet1/0
/1
permanent
3ffe:3240:800d:1:250:baff:fef2:a4f4 00-50-ba-f2-a4-f4 Vlan1 Ethernet1/0
/4
reachable
3ffe:3240:800d:2::8888 00-02-01-00-01-01 Vlan2 Ethernet1/0
/16
permanent
3ffe:3240:800d:2:203:fff:fefe:3045 00-30-4f-fe-30-45 Vlan2 Ethernet1/0/15
reachable
fe80::203:fff:fe01:2786 00-30-4f-01-27-86 Vlan1 Ethernet1/0
/5
reachable