Planet SGS-6341 Series - Page 1158

72-15
Admin mode.
Usage Guide:
Use this command to display the state (enable or disable).
Example:
Example:
Switch#show logging executed-commands state
Logging executed command state is enable
72.15 show logging source
Command:
show logging source mstp
Function:
Show the log information source of MSTP module.
Command mode:
Admin and configuration mode.
Usage Guide:
Check the log information source (include information channel, the information severity level) by
show logging mstp command.
Example:
Show the log information source of MSTP.
Switch#show logging source mstp
system module log switch status:
Channel Onoff Severity
logbuff on warning
loghost on warning
terminal on warning
72.16 show memory
Command:
show memory [usage]
Function:
Display the contents in the memory.