Planet SGS-6341 Series - Page 589

35-228
Virtual Link VLINK0 to router 10.10.0.9 is up
Transit area 0.0.0.1 via interface Vlan1
Transmit Delay is 1 sec, State Point-To-Point,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:02
Adjacency state Full
Virtual Link VLINK1 to router 10.10.0.123 is down
Transit area 0.0.0.1 via interface Vlan1
Transmit Delay is 1 sec, State Down,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in inactive
Adjacency state Down
35.62 show ip route process-detail
Command:
show ip route [database] process-detail
Function:
Display the IP routing table with specific process ID or Tag.
Parameters:
The parameter of database means displaying all the routers, no parameter means only displaying
effective routers.
Default:
Not importing any router of OSPF process by default.
Command Mode:
Admin mode and configure mode.
Usage Guide:
None.
Example:
Switch#show ip route database process-detail
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
> - selected route, * - FIB route, p - stale info