Planet SGS-6341 Series - Page 726

43-2
43.3 ospf graceful-restart grace-period
Command:
ospf graceful-restart grace-period <integer>
no ospf restart grace-period
Function:
Configure grace period of GR restarter, no command restores grace period to default value.
Parameter:
<integer>: value of grace period, unit is second and ranging from 1 to 1800.
Command mode:
Global configuration mode
Default:
60s.
Usage Guide:
Configure grace period of GR restarter (The switch processes switchover or restart protocol). GR
process should be completed during a grace period. If it does not complete GR process in time, it
should quit GR forcibly and restart OSPF normally.
Example:
Configure grace period of GR restarter to 100s.
Switch(config)#ospf graceful-restart grace-period 100
43.4 ospf graceful-restart helper max-grace-period
Command:
ospf graceful-restart helper max-grace-period <integer>
no ospf graceful-restart helper
Function:
One of GR helper policies. Configure the maximum grace period supported by helper. The no
command deletes all configured helper policies.
Parameter:
<integer>: value of grace period, unit is second and ranging from 1 to 1800.
Command mode:
Global configuration mode
Default:
Do not limit grace period supported by helper.