Planet SGSW-4802 User Manual

18
Figure 3-9: The Stack Web Page
After enable the stack function and the following screen in Figure 3-10 appears.
Figure 3-10: The Stack enable Web page
Step 4: Enter into web interface of another SGSW-series Switches (ex: 192.168.100.129).
Step 5: Choose “Stack Config” and choose the correct stack mode.
Step 6: After configure completed. Press “Save” to save the current configuration.

Planet SGSW-4802 Specifications

General

Brand	Planet
Model	SGSW-4802
Category	Switch
Language	English