68
Figure 4-54: STP Forward Delay Screen
4.2.6.9 stp set bridge <-a MaxAge>
This command allows to setting the maximum Age of STP. The available range is 6-40.
Figure 4-55: STP Max Age Screen
4.2.7 snmp--SNMP Management Commands
These commands allow configuring the SNMP Parameters. The screen in Figure 4-56 appears.
Figure 4-56: SNMP Screen
4.2.7.1 snmp [on|off]
This command allows disable (off) or enable (on) the SNMP function. Please refer to Figure 4-57 for
usage and example.
To Next Page
Loading...
Need help?
General