42
4.2 Logging on to the Switch
To log on to the Switch:
1. At the screen prompt:
Figure 4-2: SGSW-4802 Console Login on Screen
Enter the console interface factory default console password (admin) or user-defined password if you
changed the default password using the instructions in Section 4.2.1.10. The Switch Management
prompt in Figure 4-3 appears.
Figure 4-3: SGSW-4802 Console Main Screen
Please type “Help” on the command line. The main menu displays all the system command usage
that is available as below:
To Next Page
Loading...
