Planet SGSW-4802 - TRUNK Management Commands

63
4.2.4.4 vlan set pri <vid> <-p priority>
This command allow to set VLAN priority level. The screen in Figure 4-42 appears.
Figure 4-42: VLAN priority Screen
4.2.5 trunk--TRUNK Management Commands
This menu contains system parameters to display and configure the trunk of this switch. The trunk
screen in Figure 4-43 appears.
Figure 4-43: Trunk command Screen
4.2.5.1 trunk show
This command displayed the Trunk status. The screen in Figure 4-44 appears.
Figure 4-44: Trunk status Screen