EasyManuals Logo

Planet vc-231 User Manual

Planet vc-231
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
FCC Warning
This equipment has been tested and found to comply with the
regulations for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this users guide, may
cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct
the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
Energy Saving Note of the Device
This power required device does not support Standby mode
operation.
For energy saving, please remove the power cable to disconnect
the device from the power circuit.
Without removing power cable, the device will still consuming
power from the power source. In the view of Saving the Energy
and reduce the unnecessary power consuming, it is strongly
suggested to remove the power connection for the device if this
device is not intended to be active.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet vc-231 and is the answer not in the manual?

Planet vc-231 Specifications

General IconGeneral
Duplex systemFull, Half
Auto MDI/MDI-XYes
Networking standardsIEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
Converter input interface100Base-TX
Maximum data transfer rate100 Mbit/s
Fiber optic connector-
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
Wavelength- nm
Maximum transfer distance1400 m
InternalNo
CertificationFCC Part 15 Class A, CE
Product colorBlack
Input current2 A
Input voltage5 V
Power consumption (typical)6.6 W
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth70 mm
Width97 mm
Height26 mm
Weight199 g

Related product manuals