User Manual of WDAP-C3000AX, WDAP-3000AX, WDAP-W3000AX
- 65 -
Enter the Gateway assigned by your ISP.
DNS Server
The DNS server information will be supplied by your
ISP.
Select DHCP Client to obtain IP Address information
automatically from your ISP.
Select PPPOE if your ISP is using a PPPoE connection
and provide you with PPPoE user name and password
info.
Enable or disable PPTP to pass through PPTP
communication data.
Enable or disable L2TP to pass through L2TP
communication data.
WAN IP, whether obtained automatically or specified manually, should NOT be on
the same IP net segment as the LAN IP; otherwise, the router will not work properly.
In case of emergency, press the hardware-based "Reset" button.
To Next Page
Loading...
