Planet WDAP-3000AX - 4.5.2 Date and Time

User Manual of WDAP-C3000AX, WDAP-3000AX, WDAP-W3000AX
- 94 -
4.5.2 Date and Time
This section assists you in setting the system time of the router. You are able to either select to set the
time and date manually or automatically obtain the GMT time from Internet as shown in Figure 4-63.
Figure 4-63: Date and Time
Object
Description
Current Time
Show the current time.
User is able to set time and date manually.
Time Zone Select
Select the time zone of the country you are currently in. The router will
set its time based on your selection.
NTP Client Update
Once this function is enabled, router will automatically update current
time from NTP server.
NTP Server
User may use the default NTP sever or input NTP server manually.