7 USING CHAIR
User’s manual Planmeca Chair 9
7.3.2 Adjusting headrest angle
To adjust the angle of the headrest press the bar on the
side of the headrest support to release the locking
mechanism. Manually set the headrest to the angle
required and then release the bar. When adjusting, the
headrest should be supported by hand.
7.3.3 Adjusting headrest for children or short patients
The headrest can be turned around and repositioned for
better head support for children or short patients.
Pull the headrest out. Turn it around so that the cushion
faces backwards and push the headrest back into the
chair.
Turn the cushion around (180° counterclockwise).
To Next Page