Planmeca Chair - Automatic Legrest Operation

7 USING CHAIR
User’s manual Planmeca Chair 11
7.5 Automatic legrest
The automatic legrest can be moved synchronously to the
movements of the backrest, that is, when you drive the
backrest down, the automatic legrest is driven up. Use the
chair movement buttons to drive the patient chair. Notice
that the lever underneath the legrest has to be unlocked
(moved to the right) in order to move the legrest with the
backrest.
The automatic legrest can be locked approximately 18°
from the horizontal position. To lock the legrest the lever
has to be locked to the left. Support the legrest with your
other hand when locking or unlocking the lever. Notice
that the backrest will move upward and downward when
the legrest is locked.
PM_Chair_legrest_3.eps
Backrest
Automatic legrest
Lever
PM_chair_legrest_2.eps
Lever
Horizontal position
Approx. 18° from
the horizontal
position