Plockmatic SQF-200 SquareFolder

SQF-3-19
Replacement
Adjustment
29 November 2006
Removal Q7, LED
1. Remove Outfeed Cover (
3.1.4).
2. Disconnect connector [A] (
x 1).
3. Remove nut [B] (
x 1).
4. Remove LED [C].
Removal Q7, phototransistor
1. Tilt machine (
3.3.6).
2. Disconnect connector [D] (
x 1).
3. Remove nut [E] (
x 1).
4. Remove Phototransistor [F].
SENSORS AND SWITCHES
Outfeed Sensor (Q7)
Phototransistor
LED
White
Red
[C]
[A]
[B]
[D]
[F]
[E]