Pocketbook Pro 902 - Getting Started

14
Getting started
STEP 1. CHARGING THE BATTERY
When you charge your device for the first time keep it
charging for 8 – 12 hrs without switching it on. You can
charge your PocketBook Pro 902 battery from:
 a PC via the USB-cable;
 the mains, using the USB-charger (optional).
When charging the battery for the first time:
1. Make sure the device and its power indicator are off. If it
is on, keep the ‘On/Off’ button pressed for a few seconds.
2. Connect this device to a computer using a cable or to
the AC mains using power supply unit.
3. The indicator turns yellow as soon as the charging
process starts.
4. When the battery is fully charged, the indicator will lit
continuously yellow..
5. Now you can disconnect the device and turn it on for the
first time.
If your device remains active during charging, the
PocketBook screen will display a request to select between
charging the battery and connection for data transmission.
Charging will only start after you select the respective mode.