Pocketbook Pro 902 - Wi-Fi Connection

77
Wi-Fi Connection
1. Select Settings > Connection > Wireless Wi-Fi
Connections. Select the connection that you want to
configure;
2. Press ‘Connection Name’ and the on-screen keyboard
will appear; enter a name to be used for connection of
PocketBook Pro 902 via Wi-Fi. Press ‘OK’ to save changes
or ‘Cancel’ to hide the keyboard.
3. In the drop-down menu select the required access point
or enter network name (SSID) similar to i. b.
4. Set ‘Security’ type from the drop-down list:
o None;
o WEP;
o WPA-Enterprise;
o WPA-PSK.
Encryption is not set by default. When selecting the type
of Encryption, the box for entering an access code will be
displayed.
Note: You can use up to 64 characters in your password for
WEP-PSK encoding.
5. Open “Disconnect if not active for (minutes)” and select
a value from the drop-down list.
 5;