79
Proxy password.
9. Check that your connection settings are correct. To do
so, press ‘Test connection’. The message ‘Connecting’ will
appear. If connection fails you can look through the event
log.
Note: To make a connection to function, you must assign it
a name. Connection with a default name inefficient. Names
of all connections must be unique. Be sure to specify the
access point name.
Note: You can use Wi-Fi to connect to the Internet. You
cannot transfer files over the Wi-Fi network.
Note: The device can connect to a Wi-Fi access point with a
hidden SSID network name.
You can use up to 64 characters in your password for WEP-
PSK encoding.
Note: The device can connect to a Wi-Fi access point with
enabled filtering of MAC addresses.
Internet connection lost
The device makes it possible to end active Internet
connections.
To do this, select Settings > Connection > Access to
network. Set the “Disabled” state.
You can also set the Internet connection to short by
clicking the “On / Off" button.
To Next Page
Loading...
