82
6. Go to “Disable if idle for (minutes)” and select a value
from the drop-down list:
5
10
20
30
60.
7. To pair with an A2DP audio device, you must enable the
connection by pressing the ‘"Enable?" option.
Upon completing the connection it will be necessary to
enter a Bluetooth PIN.
Check your instruction manual if you have questions
about the Bluetooth PIN required for pairing (pairing is
performed during the first connection; no PIN is required
for further connections).
The Bluetooth and А2DP connection icons appear in the
status bar, once enabled. Then you can listen to music or
use the of text-to-speech conversion service, via the
Bluetooth stereo audio system. An active A2DP
connection is needed.
To disable the connection with the A2DP audio device,
press the A2DP connection icon with your stylus; in the
dialog that follows press the "Disable" button or go to
settings of the profile being used and select the "Disabled"
option in the “Enable?” box select “Off”.
To Next Page
Loading...
